博鴻牌斜式4508/6516全自動攻絲機視頻展示如下，點擊可觀看。如果不能打開請加微信號：

點擊可觀看全自動攻絲機視頻：

4508/6516全自動攻絲機產呂參數介紹：

博鴻牌斜式4508/6516全自動攻絲機部分功能介紹如下圖：

4508/6516全自動攻絲機部分加工產品展示，不同的產品不同的設計，歡迎大家來樣詳談.

1.此全自動攻絲機是高速生產標準機，夾具根據客戶的產品量身設計，所以動作由軟件控制，設備參數靈活設置，方便功能  調整和技術升級，永不落后；

2.此全自動攻絲機不會損壞絲錐，不會出現爛牙、壞牙，對客戶產品外觀無損傷。所加工的螺紋光潔度高，通止100%；
3.全自動攻絲機占地面積少，效率高，穩定性好，省人手，設備實現了自動送料、自動加工、自動退料全自動化，一人可同時操作多臺設備；
4.故障自診斷功能，如出現異常故障、絲錐損壞等設備自動聲光報警并停機，故障原因自動顯示；
5.更換夾具方便，可用于多種類似產品共用此設備。
6.全自動攻絲機可針對蓋型，圓螺母，軸檔，柳釘，套管，及各種異型螺母等工件的盲孔牙、通孔牙、細牙、擠牙、板牙等加工均可適用。


1 This equipment is high speed production standard machine, the fixture according to the customer's product design, so the action by the software control, equipment parameters flexible settings, convenient function adjustment and technology upgrade, never behind;
2 This device will not damage the tap, not rotten teeth, bad teeth, no damage to the customer product appearance. The processed thread finish is high, 100%;
3 Equipment covers an area of less, high efficiency, good stability, the provincial manpower, equipment to achieve automatic feeding, automatic processing, automatic withdrawal of the full automation, one person can operate multiple devices at the same time;
4 Fault self diagnosis function, such as automatic fault, acousto-optic alarm and shutdown equipment tap damage, fault automatic display;
5 Replacement of the fixture is convenient, can be used for a variety of similar products to share this equipment.

6 For cover type, round nut, shaft sleeve, gear, rivets, and various special-shaped nut and other parts of the blind hole, fine teeth, tooth teeth, teeth, etc. for extrusion die can be processed.

本文來自全自動攻絲機廠家網站：http://www.goodnpc.com/。